CONTACT US
P.O. Box 1120
Mandeville, La 70471
info@velocitydrillingfluids.com
T: 985.893.6600
OUR PRODUCTS
Bore Drill
Clay Stop
Mud Thin
Sand Zan
Sand Pac
Bore Boost
Bore Clean
QUICK LINKS
FOLLOW US
Velocity Drilling Fluid Products
Showing all 9 results
-
MORE INFOBore Boost
Bore Boost is a non-foaming Surfactant that water wets the formation which prevents sticking on the dill pipe and bit. It is made for fresh water drilling systems only and should be used in conjunction with other Velocity Energy Services products
ADVANTAGES
- Reduces the stickiness of clay to ensure the bit stays clean.
- Excellent surfactant in in water based fluid systems.
- Coats drill pipe string and produces and creates good flow of cuttings material.
- Water wets surfaces to help keep bit cool in mud and rocky soil conditions.
- Softens and conditions hard water to maximize other Velocity Products
PROPERTIES
Physical State Liquid
Appearance Green
Specific Gravity 1.4
Density (lbs/gal) 8.51
Solubility in water(%) 100% Soluble
APPLICATION
VSX100 is used to disperse clay and other solids coming into contact with the drilling fluids. It works by water wetting all surfaces preventing solids from sticking to them. It will not affect fluid loss, filter cake or rheological properties.
MIXING
Treatment
- ½ Gallon Bore Boost Treats 500 Gallons of Water
- Best when used with Bore Drill and Clay Stop
Recommended Fluid Formulation
- 2 LBS of soda ash
- 1 quart of Bore Boost
- 1 quart of Bore Drill
-
MORE INFOBore Clean
Bore Clean is a liquid solution of nonionic surfactants formulated to lower surface tension and increase wetting properties of drilling fluids.
ADVANTAGES
- Assists in keeping the drill bit clean and prevents bit balling
- Designed to work in fresh or saltwater
- Mixes very easily
- Promotes settling of clays at the reserve pit/tank
- Reduces torque and drag associated with drilling in swelling clays
PROPERTIES
Appearance Viscous Liquid
Specific gravity @ 20°C .99 – 1.01
Solubility Instant
Flash Point >200°
APPLICATION
Designed to reduce the interfacial tension and inhibit the hydration and dispersion of clay and shale.
MIXING
Treatment
- ½ gallon of Bore Clean treats 500 gallons of water
Recommended Fluid Formulation for Drilling in clay (Per 500 Gal)
- 2 LBS SODA ASH
- ¼ Gallon Bore Drill
- ½ Gallon Bore Clean
NOTES:
Bore Drill inhibits the swelling of clay. Bore Clean is used as a wetting agent to prevent clay from sticking to the product line and downhole tooling. May need to increase Bore Clean to 4 Qts per 500 gallons if clay is highly reactive (sticky) Add soda ash at a rate of 1 pt/100 gallons to treat water prior to mixing other additives. Soda ash will enhance the yield of your additives.
-
MORE INFOBore Drill
Bore Drill is a multi-functional liquid polymer designed to improve drilling efficiency in both horizontal and vertical drilled holes through its rapid field mixing, viscosity development, and clay and shale inhibition.
ADVANTAGES
- Performance in fresh water to very heavy brines
- Shale stabilization
- Viscosity Modifier
- Supports fluid loss control
- Provides Borehole lubrication
PROPERTIES
Appearance Opaque
Degree of Charge, % medium to low
Specific gravity @ 20°C 1.02 – 1.05
Viscosity, as is, cps ~1500
Shelf life, months 6
Dosage 0.5-2.0 lb/bbl
APPLICATION
Designed for use as a drilling fluid polymer for improved viscosity, bit lubrication, and shale stabilization/inhibition. Can be mixed into bentonite slurries for use in vertical or horizontal drilling applications.
MIXING
Treatment
- ½ gallon of Bore Drill will treat 1000 gallons of water
Recommended Fluid Formulation for clay (Per 500 Gal)
- 2 LBS Soda Ash
- ¼ Gallon Bore Drill
- ¼ Gallon Bore Boost
Notes:
Bore Drill inhibits the swelling of clay. Bore Clean is used as a wetting agent to prevent clay from sticking to the product line and downhole tooling. May need to increase Bore Clean to 4 Qts per 500 gallons if clay is highly reactive (sticky) Add soda ash at a rate of 1 pt/100 gallons to treat water prior to mixing other additives. Soda ash will enhance the yield of your additives.
-
MORE INFO
Bore Drill P
Bore Drill P stabilizing agent is a free flowing, water-soluble, easy mixing, 100% active, dry granular polymer. Bore Drill P stabilizing agent is a very high molecular weight partially hydrolyzed polyacrylamide (PHPA) polymer. When mixed with fresh water, a small quantity of Bore Drill P stabilizing agent can provide a clear, solid-free, viscous borehole stabilizing fluid for use in drilled shaft, auger drilling, horizontal directional boring, trenching excavation and reverse circulation (RC) rotary drilling. Bore Drill P stabilizing agent is not designed to be used in conjunction with bentonite based fluids (Gel).
ADVANTAGES
- Efficient shale/clay stabilizer and viscosifier
- Does not require solids control unit to clean the slurry
- Helps maintain a stable and gauge borehole
- Helps maximize skin friction and ultimate end bearing capacity for a drilled shaft
- Non-fermenting
- No petroleum distillates involved
- Can be broken down chemically with bleach (sodium hypochlorite)
PROPERTIES
Appearance white granular
Bulk density, lb/ft3 52
pH (0.25% solution) 8.5 to 9.0
APPLICATION
- Build a clay-free boring fluid
- Stabilize reactive clay and shale formations
- Enhance core recovery in continuous wireline coring operations
- Provide high cohesiveness to bind excavated sandy soil and gravel
- Removal of drilled spoils from augers and increase excavation rate
- Maximize load transfer for drilled shaft application
MIXING
Treatment
- 1-2 Pound of Bore Drill P will treat 100 gallons of water
Recommended Fluid Formulation for clay (Per 500 Gal)
- 2 LBS Soda Ash
- 5 LBS Bore Drill P
- ¼ Gallon Bore Boost
- ¼ Gallon Clay Stop
-
MORE INFOClay – Stop
Clay-Stop is a concentrated, non-hazardous, proprietary clay inhibitor that can be used with either polymer or bentonite drilling fluid systems.
ADVANTAGES
- Greatly reduces clay rings and bit balling
- Increases returns to the surface
- Non-hazardous
- Readily dispersible
- Reduces pullback pressures
- Reduces torque
PROPERTIES
Appearance Clear to light amber/pale yellow.
Odor. Faint amine odor.
Odor threshold. Threshold not determined.
pH 6.5-8
APPLICATION
Clay-Stop is to be used on any size HDD bore. Using Clay-Stop will greatly reduce or eliminate clay cuttings from sticking to each other and to the drilling tools.
MIXING
Treatment
- ¼ gallon of Clay-Stop treats 500 gallons of water
Recommended Fluid Formulation For Drilling In Clay (per 500 Gal)
- 2 LBS Soda Ash
NOTES:
Clay-Stop should be added to the drilling fluid system last. For sticky and swelling clays use 0.25 to .5 gallon per 500 gallons (2 to 4 liters/4 m3) depending on water sensitivity of the formation.
For maximum effectiveness, Clay-Stop should be used starting with the pilot hole and all reaming and pullback stages. Clays begin swelling and absorbing water immediately upon contact with water starting with the pilot hole. Clay-Stop will eliminate or greatly reduce this problem.
-
MORE INFOMud Thin
Mud Thin is a mud thinner and deflocculant that provides the cleanest and most effective mud viscosity control.
ADVANTAGES
- Quick make-up and thinning action
- Non-foaming
- Functions over a wide pH range
- Contributes to fluid loss control
- Reduces mud viscositywithout mud dilution
PROPERTIES
Appearance Amber Liquid
Specific Gravity 1.3 g/cm³
Bulk Density 10.8 lb/ft³
pH 6.5-7.5
Temp. Stability >400°
Solubility Miscible
APPLICATION
Mud Thin enhances and improves filtration rate control, functions at virtually all pH levels, and is non-toxic it also contains no heavy metals. It prevents bit balling and mud rings it also reduces viscosity and gel strenghts.
MIXING
Bit Balling / Mud Rings
- ½ gallon to 1 gallon of Bore Thin per 500 Gallons
Thinning
- Slowly add Mud thin to mud until desired viscosity is achieved
-
MORE INFOSand Pac
Sand Pac is an easy mixing, water soluble, polymer supplied as a granular powder. Sand Pac is designed for preparation of viscous earth-reinforcing fluids or slurries for a variety of drilling, trenching, and walling applications in the geo-construction industry.
ADVANTAGES
- Can be mixed directly in the borehole or excavation
- Stabilizes borehole while excavating; improves skin friction
- Non-gelling, even at high viscosities, facilitating settlement of fines, and maintenance of a clean fluid
- High cohesiveness to bind excavated soil and gravel
- Improves loading and removal of spoils
- Works well in both fresh and saltwater
PROPERTIES
Appearance: Solid. Powder. Dust.
COLOR: White
WEIGHT: NA
ODOR: Odorless or no characteristic odor.
pH: 6.5-8.0
APPLICATION
Sand Pac is ideal for slurry trenching, diaphragm walls, drilled shafts/bored piles, and tunneling.
MIXING
Treatment For 500 Gallons of Water
- 5lbs of Sand Pac will treat 500 gallons of water, use Soda Ash to lower water hardness
- Sand Pac should be used in addition to other Velocity Energy Services products
Excavation Treatment
Sand Pac should be mixed by sifting carefully into a stream of water directed into the excavation or an agitator mix tank. Make-up water should have a pH of 8-10; add 6 lbs SODA ASH per 1,000 gallons water.
-
MORE INFOSand Zan
Sand Zan is a 4.0 lb/gal active, high purity xanthan gum slurry. It is used to design low-solids fluids that have effective carrying and suspending properties. Sand Zan is effective in most water-based fluid applications for rheology modification, solids suspension, and improved hole cleaning.
ADVANTAGES
- Readily disperses to enable mixing in low shear environments
- Excellent stability in brines
- Enhances gel strength and an effective viscosifier
- Transports Larger cuttings, Gravel and cobble over long bores
- Strengthens filer cake and improves bore stability
- Effective over a wide pH range
PROPERTIES
Appearance Tan to light brown slurry
Specific Gravity 1.04 to 1.08
Density 8.67 to 9.01 lbs/gal
pH (1% soln. in water) 6.0 to 8.0
Flash Point >230°F (>110°C)
Solubility in Water Soluble
Active content 4.0 lbs/gal
APPLICATION
Designed to enhance gel strength of the drilling fluid for improved suspension and transporting of drill cuttings, gravel, and cobble on long bores. Sand Zan will perform effectively in fresh or saltwater.
MIXING
Treatment
- 1 Gallon of Sand Zan treats 500 gallons of water
Recommended Fluid Formulation sand and cobble (Per 500 Gal)
- 2 LBS SODA ASH
- 50 LBS GEL
NOTES:
Sand Zan can be added to enhance the suspension capability of the fluid. Sand Zan enhances the wall cake to keep the formation better isolated. Add soda ash at a rate of 1 LBS per 100 gallons to treat water prior to mixing other additives. Soda ash will enhance the yield of your additives.
-
MORE INFO
Sand Zan P
Sand Zan P is a premium quality, powdered biopolymer that is used to enhance the carrying capacity of both clay and polymer-based drilling fluids. Sand Zan P is easily dispersible in fresh or brackish water.
ADVANTAGES
- Can mix easily into pre-hydrated bentonite-based fluids
- Helps enhance system by increasing the suspension properties of the base drilling fluid with a minimal increase in viscosity
- Small packaging for ease of handling and reduction of waste
PROPERTIES
Appearance Free-flowing beige powder
Specific gravity 1.6
Bulk density (lb/ft3 ) 45
pH (0.14% or 0.5 lb/bbl) 7.1 – 7.4
APPLICATION
Increased gel strength of the drilling fluid for better suspension of the drilled cuttings, coarse sand and gravel. Enhanced carrying capacity for solids suspension at lower viscosity to further ensure flowability on longer length bores and backreams.
MIXING
Treatment
- 3 to 5 pounds of Sand Zan P treats 500 gallons of water
- Best If Used with Other Velocity Products
Recommended Fluid Formulation sand and cobble (Per 500 Gal)
- 2 LBS Soda Ash
- 50 LBS Gel
NOTES:
Sand Zan P can be added to enhance the suspension capability of the fluid. Sand Zan P enhances the wall cake to keep the formation better isolated. Add soda ash at a rate of 1 LBS per 100 gallons to treat water prior to mixing other additives. Soda ash will enhance the yield of your additives.